ODM PCBs · ODM products · OEM development
CameVision robotic cameras
Camera PCBs in single, double, triple, 5-fold and 9-camera versions — all ODM. Finished products on the same family — headset, cap, helmet, backpack array, handheld gripper — also ODM. When the design does not exist yet, we develop it as OEM. Funded teams can build at our Shenzhen R&D center through Camemake Lens.
Request ODM / OEM Camemake Lens EGO double PCB in shop
1. PCB versions 2. EGO specs 3. Engineering 4. ODM products 5. ODM / OEM / Lens
Single PCB · ODM
Double PCB · ODM
Triple PCB · ODM
5-fold PCB · ODM
9-camera PCB · ODM
Select a PCB version
The family is the same platform. Camera count changes sync, CSI topology, IMU count, power and how you mount it. Click a version.
Single-camera PCB — ODM
One sensor on the board. Lowest power, simplest FPC, one CSI (or USB / DVP). Use for monocular VIO, documentation, a teaching viewpoint, or a wrist / tool camera when depth is computed elsewhere.
| Cameras | 1 × rolling or global shutter (sensor matched to scene) |
|---|---|
| IMU | Optional, one IMU on the board |
| Sync | Not required. Frame timestamps only if you fuse later. |
| Interface | MIPI CSI-2, USB 2/3 UVC, or DVP/SPI on compact hosts |
| Optics | M-size lens, FOV from tele to fisheye |
| Typical host | MCU, Raspberry Pi, ESP32-P4, small SoC |
| ODM | Our PCB, your brand, housing and volume |
Double-camera PCB — ODM · CameVision EGO · CV-EGO01-OS
Hardware-synced stereo pair with one IMU per camera. Evaluation board on the webshop. This is the default for SLAM, VIO and egocentric stereo.
| Cameras | 2 × 2.3MP global shutter, synchronized |
|---|---|
| IMU | 2 × IMU, one per camera |
| SoC | Rockchip RV1126B + integrated NPU |
| Memory / storage | 1 GB RAM, 16 GB eMMC + microSD |
| I/O | USB 3, Wi-Fi 6, BLE, battery pads, USB-C |
| Sync | Hardware stereo sync. IMU time-aligned per camera. |
| Webshop | USD 199 at MOQ 10 · USD 160 at 1000 |
| ODM | Same board under your brand, or we change baseline / connector |
Triple-camera PCB — ODM
Stereo pair plus a third camera (rear, up, or a second FOV). Extra CSI (or a serializer) and a shared trigger so all three frames share one time base.
| Cameras | 3 — typically 2 × stereo + 1 × context |
|---|---|
| IMU | IMU on the stereo pair; third camera optional |
| Sync | Shared trigger / multi-CSI. One timestamp domain. |
| Bandwidth | Three raw streams — SoC CSI count or GMSL/FPD-Link if the cable is long |
| Use | AMR with rear view, helmet with up-camera, teaching + aisle |
| ODM | Our triple layout, your brand and mechanical |
5-fold PCB — ODM
Five cameras on one timed array: front stereo, temples / periphery. This is the board under the backpack wearable. Compute often leaves the head and sits in the pack (Wi-Fi 6 / USB 3 / battery).
| Cameras | 5, hardware-synced |
|---|---|
| Geometry | One mechanical datum. Extrinsics factory-calibrated as a set. |
| Compute | On-board SoC or backpack (RV1126B-class or Jetson / Rockchip host) |
| Power / thermal | Five sensors + radio. Budget and airflow are part of the ODM package. |
| Cabling | Short FPC on the head; one tether to the pack |
| ODM product | Also offered as a finished wearable — see below |
9-camera PCB — ODM
Near-surround workplace capture. The product is sync, bandwidth and calibration — not nine independent webcams. Multi-CSI / serializers, a defined power tree, and one extrinsics report for the whole array.
| Cameras | 9, one trigger domain |
|---|---|
| Bandwidth | Host must accept nine streams (or compressed / subsampled on SoC) |
| Calibration | Array-level extrinsics and serialised QA data |
| Thermal | Duty cycle and housing airflow specified with the ODM package |
| Use | Cell / workplace capture, multi-view demonstration data |
| ODM | Our 9-camera layout, your brand, volume production |
ODM camera PCBs — 1, 2, 3, 5 and 9
CameVision is a family of camera PCBs you can take into your own product. Single, double, triple, 5-fold and 9-camera versions are available as ODM: our layout, your brand, your housing, your volume.
The double board (CameVision EGO, CV-EGO01-OS) is the evaluation unit on the webshop — dual 2.3MP global shutter, dual IMU, Rockchip RV1126B, USB 3, Wi-Fi 6. The other counts follow the same platform.
- Single — one camera on the PCB
- Double — stereo pair (EGO)
- Triple — three cameras on one board
- 5-fold — five cameras on one board
- 9-camera — nine cameras on one board
CameVision EGO — published double-PCB specification
SKU CV-EGO01-OS. Evaluation pricing on the webshop. ODM for your brand and volume.
| Item | Value |
|---|---|
| Cameras | 2 × 2.3MP global shutter, synchronized stereo |
| IMU | 2 × IMU, one per camera |
| Processor | Rockchip RV1126B |
| NPU | Integrated on the RV1126B |
| RAM | 1 GB |
| Storage | 16 GB eMMC + microSD |
| Wired | USB 3 · USB-C |
| Wireless | Wi-Fi 6 + BLE · u.FL antenna |
| Power | Battery pads (+ / −) and USB-C |
| Debug | RX / TX test points, three tactile buttons |
| Software | Open-source demo on GitHub |
| Applications | SLAM, VIO, robotics, egocentric / spatial AI |
| Price | USD 199 (MOQ 10) · USD 160 (MOQ 1000) |
Engineering notes — open these
SLAM and grasp pipelines assume a single exposure time per stereo pair. Rolling shutter shears edges when the robot or the hand moves. CameVision double and above use global shutter and a shared trigger so left/right (and extra cameras) share one time base. IMU samples are taken on the same board as the sensor they describe — not “somewhere on the chassis.”
Visual-inertial odometry needs the IMU in the camera frame, with a known lever arm. EGO puts one IMU at each camera. On 5-fold and 9-camera arrays we keep IMUs on the stereo pair that runs VIO and treat the other cameras as calibrated extras unless you specify otherwise.
EGO evaluation: USB 3 and Wi-Fi 6 / BLE, compute on the board. ODM/OEM into a robot: MIPI CSI-2 into Jetson, Raspberry Pi, Rockchip, NXP i.MX. Long dress packs: GMSL or FPD-Link so you do not run raw CSI down the arm. Same sensor vendors as the rest of Camemake: Sony, onsemi, OmniVision, SmartSens, GalaxyCore, Himax.
Stereo and multi-camera boards ship with factory extrinsics and a serial. Arrays (5-fold, 9) are calibrated as one unit. Production: serial labelling, QA reports, calibration files, long-term supply. Direct manufacturer — Belgium engineering, China production, Hong Kong HQ.
M-size lenses (M1 upward). IR-cut or IR-pass, low-distortion or fisheye. Baseline and IPD are set to the product (headset vs robot faceplate vs gripper spine). Board thickness, FPC length and connector side are ODM options. Wrist / dress-pack work is usually OEM if it is not one of the finished products below.
ODM products — already designed
Finished goods on the same PCB family. Click a product. Your brand, our design and production.
Stereo headset — ODM
Double PCB at human IPD. Head strap, dual global-shutter cameras, optional onboard compute (EGO) or USB 3 / Wi-Fi out. For demonstration capture, teleoperation and wearable SLAM.
ODM: colour, logo, strap, FOV, IPD. OEM if you need a different camera count or a medical / safety certification path we do not already hold.
Cap — ODM
Double PCB in the brim. Lower mass than the headset. Same stereo geometry, smaller battery and simpler cabling. Factory-floor and consumer-style egocentric capture.
PPE helmet — ODM
Double PCB under the brim of a hard hat. Side compute / battery module. Site, warehouse and industrial cells where the operator already wears PPE.
5-fold array + backpack — ODM
Five-camera head rig, tether, modular backpack (compute, radio, battery). 9-camera uses the same pack architecture with a denser head array. Power tree and cooling are part of the ODM file set.
Handheld teaching gripper — ODM
Pistol grip, trigger, parallel jaws, camera on the spine looking at the grasp. Built so human demonstrations transfer to a robot (UMI-style teaching). Single or double camera on request. Wrist-mounted variants are OEM if they are not this tool.
Which path?
| ODM PCB | ODM product | OEM | Camemake Lens | |
|---|---|---|---|---|
| What you get | Bare board 1 / 2 / 3 / 5 / 9 | Headset, cap, helmet, pack, gripper | Full design + production | R&D center + engineers in Shenzhen |
| Who owns the design | Camemake platform, your brand | Camemake product, your brand | Your product, we engineer it | Your startup product, isolated project |
| When to use | You have a housing | You want a finished good | Nothing in the family fits | Funded team, need lab + factory |
| Equity | — | — | — | 0%. Produce with us when you ship. |
OEM process
1. Brief
Camera count, baseline, host (Jetson / RPi / Rockchip / PC), cable length, environment, certification.
2. Configuration
Sensor, shutter, optics, interface (CSI / USB / GMSL), mechanical envelope. Quote.
3. Samples
Boards and, if needed, a housing. Calibration files with the serials.
4. Production
SMT / COB / CSP in our lines. QA, serials, volume. Same factory as the ODM family.
PCBs and products as designed
We develop the full solution
Build in our Shenzhen R&D center
Handheld gripper — ODM. Wrist and custom — OEM.
The pistol-grip teaching gripper with a camera on the spine is an ODM product. Brand it and produce it with us.
If you need a wrist camera, a different gripper, or a form factor that is not in this family, that is OEM: we design the PCB, optics, mechanics and firmware, then manufacture it.
Camemake Lens — Shenzhen R&D center
Hardware accelerator for funded camera startups. Optical lab, cleanroom, ESD assembly, on-site mechanical / optical / firmware engineers. 0% equity, no program fee. Rolling admissions. Most projects start remote; you come to Shenzhen when the bench matters. When you ship, you produce on our line.
Related products in the shop
Görüntü Sensörü Partnerlerimiz
FAQ
Single, double, triple, 5-fold and 9-camera. All five are ODM. The double board (CameVision EGO, CV-EGO01-OS) is also listed in the webshop for evaluation.
Stereo headset, cap, helmet, five-camera backpack array, and the handheld teaching gripper. Your brand, our design and production.
We develop the full solution for you: PCB, optics, mechanics and firmware, then manufacture it. Use OEM when the ODM PCB or ODM product is not the right fit.
Our hardware accelerator for funded camera startups, based at the Shenzhen R&D center. Lab, cleanroom, ESD assembly, on-site engineers. No equity. When you ship, you produce with Camemake. Details and application: Camemake Lens.
EGO’s public sheet lists dual 2.3MP global shutter, dual IMU, RV1126B, USB 3 and Wi-Fi 6. Baseline, exact sensor PN, FPS and FOV are set per ODM/OEM configuration — we confirm those on the quote so we do not publish a number that only fits one build.